Manufacturer-direct paddy straw pellets. Hard cylindrical biomass fuel produced at our own pellet plant in Bhiwani, Haryana — one of India’s largest paddy-growing belts, which gives us contracted, year-round access to raw paddy straw. Every lot is sourced, milled, dried, pelletized, cooled, screened and bagged under our control.
Unlike traders and brokers, we operate the pellet mill ourselves. Factory-gate supply, per-lot Certificate of Analysis, and export-ready documentation with every container.
Technical Specification
| Raw material | 100% paddy (rice) straw — naturally dried and milled |
|---|---|
| Diameter | 8–12 mm (uniform); custom sizing on request |
| Calorific value (GCV) | 3,800–4,200 kcal/kg |
| Moisture (ARB) | 10% or less — controlled by drying before pelletizing |
| Ash content | Reported per lot in the COA |
| Sulphur / nitrogen | Low — plant residue fuel; exact values in per-lot COA |
| Fines | Low; mechanical screening before bagging |
| Bulk density | approx. 550–700 kg/m³ bagged |
| Packing | 15 kg PE bags on pallets, or 1,000 kg FIBC jumbo bags |
| Shelf life | 12 months in dry storage (below 35°C, away from moisture) |
| HS code (suggested) | 4401.39 — final classification confirmed by your broker |
Applications
- Industrial boilers — textile, food processing, chemical, brick, tile and ceramic kilns. Direct coal or oil replacement.
- Rice mills and agro-plants — on-site steam generation with a locally sourced fuel chain.
- Power and heat co-firing — biomass co-firing at coal plants where blended fuel is accepted.
- District heating — centralized biomass heating for industrial parks and estates.
Capacity and delivery
- Plant capacity: 30 tonnes/day (single shift; two shifts possible)
- Monthly output: approx. 750–800 tonnes
- Annual output: approx. 9,000–10,000 tonnes
- Container fill rate: one 20-ft container filled in 1–2 days
- First shipment (new buyer): 2–4 weeks from PO — production 1–2 days, lab COA 2–4 days, stuffing and clearance 5–7 days
- Subsequent shipments: 7–10 days against running stock
- Dispatch ports: Kandla / Mundra (shortest inland haulage from Bhiwani) or JNPT per buyer preference
Quality assurance
Every lot is tested and certified before dispatch. The Certificate of Analysis covering calorific value, moisture, ash, fines and pellet dimensions accompanies each container. For first-time buyers we recommend independent laboratory verification — SGS, Intertek or Bureau Veritas — for the first two or three shipments, at buyer’s or seller’s cost, before switching to per-lot COA only. Pre-shipment photo reports are sent with the lot.
See it in production
Watch the plant video on YouTube
Pricing is issued per quotation. Contact us with your quantity, destination port and packing preference and we will send a proforma invoice with firm prices on our current contract.