Surgical Skull Clamp – Cranial Stabilization System
Fix-S1 — Three-Pin Head Fixer | 360° Ball Joint | Aluminium Alloy Body
The Neway FIX-S1 Surgical Skull Clamp — also known as a neuro head attachment or three-pin head fixer — is a precision cranial stabilization system for neurosurgery. It holds the patient’s head firmly in a fixed, repeatable position so the surgeon can work at magnification in a stable field.
It provides comprehensive multi-axis adjustment, and it is designed to work as a matched item with the Neway Neurosurgery Table FIX-S1.
Three-Point Pin Fixation
Three-point fixation is the standard in cranial surgery, and the reason is stability with minimal tissue pressure. Two pins on one side and one on the other give a rigid hold on the skull without the concentrated loading that a two-pin design applies. The pin pressure is spread over three contact points, which means the head is held firmly without excessive indentation, and the geometry of the hold does not shift under the surgeon’s instrumentation.
The system includes both adult and paediatric pin sets. Paediatric cases need smaller pins and a narrower span, and having the correct set available avoids the delay of ordering one mid-list — a delay that in neurosurgery means the patient waits under anaesthesia for nothing.
Multi-Axis Adjustment and 360° Ball Joint
The skull clamp has to place the head in exactly the position the surgeon has planned, and that position is rarely straight up or straight down. The full 360° universal ball joint handles the rotation, while forward/backward, side-to-side and up/down movement covers the rest of the range.
Once the head is positioned, the locking function on the head nail frame secures it, so the position is held for the duration of the case without the surgeon having to keep an eye on it. The vertical adjustment of 0° to 90° and the rotational tilt angle of at least 75° cover the positions needed for supine, prone, lateral and seated approaches.
Construction and Finish
The body is aviation-grade aluminium alloy with a hard anodized surface finish. The anodizing is the significant detail: it is not a paint layer, so it cannot chip or peel, and it will not corrode in the repeated disinfection cycle a theatre runs. A painted frame eventually develops a chipped area that harbours contamination, and that is a failure mode the hard anodized finish removes entirely.
Aluminium alloy is also the right material for a component that is handled and repositioned constantly during a long case, and whose weight matters when it is cantilevered out over the patient’s head.
Patient Positions Supported
- Supine — the standard frontal and parietal approach
- Prone — posterior fossa and spine approaches
- Lateral — temporal and lateral approaches
- Seated — for procedures requiring the head above the heart
An optional silicone U-shaped head support is included for ENT surgery, where a three-pin fixation is not required and the head is instead cradled rather than pinned.
Technical Specification
| Parameter | Specification |
|---|---|
| Model | FIX-S1 |
| Type | Three-pin cranial stabilization system |
| Body material | Aviation-grade aluminium alloy, hard anodized finish |
| Pin width adjustment (left / right) | 90 – 250 mm |
| Universal ball joint rotation | 360° |
| Universal ball vertical adjustment | 0° – 90° |
| Axis length | 500 mm |
| Side swing range | 190 – 590 mm |
| Up / down movement range | 350 mm |
| Rotational tilt angle | ≥ 75° |
| Available pin diameters | Ø12 / 14 / 16 / 18 / 20 / 22 mm |
| Pin sets included | Adult and paediatric |
| Optional | Silicone U-shaped head support for ENT surgery |
Why Choose Neway
- ISO 9001:2015 and ISO 13485:2016 certified manufacturer in Bhiwani, Haryana
- Factory-direct pricing with no distributor margin
- Nationwide installation, AMC/CMC service and ex-stock spare parts
- Specified as a matched item with the Neway Neurosurgery Table FIX-S1
- Export-quality build, made in India
Related Products
- Neurosurgery Table — radiolucent table for brain and spine procedures with head fixation
- Orthopedic Table — heavy-duty radiolucent table for spine and joint work
- All Operating Surgical Tables
- Request a quote for your operation theatre





