Neway manufactures cath lab OT tables for cardiac catheterization laboratories, electrophysiology suites, and interventional radiology departments across India. Our catheterization table — also supplied as a cardiac cath lab table and C-arm compatible OT table — uses a 35 mm carbon-fiber sandwich tabletop that gives interventional teams a wide, unobstructed imaging window while holding the patient steady through long procedures.
Manufactured at our Bhiwani, Haryana facility. ISO 9001:2015 and ISO 13485:2016 certified. Factory-direct pricing with nationwide installation and AMC/CMC support.
The Neway Catheterization Table is our dedicated cath lab table, engineered specifically for the demands of image-guided cardiac and endovascular work.
| Parameter | Specification |
|---|---|
| Tabletop construction | Carbon-fiber sandwich, 35 mm thick |
| Table length | 240 cm |
| Table width | 55 cm |
| Imaging area | 180 cm |
| Horizontal slide | 80 cm |
| Lateral slide | 25 cm |
| Height adjustment | 80–110 cm, motorized |
| Horizontal / lateral sliding | Manual, bilateral |
| Patient weight capacity | Up to 250 kg |
| Imaging compatibility | C-arm / fluoroscopy |
| Power supply | 110/220 V AC, 50/60 Hz |
A cath lab table is not a general OT table with a different name. The working environment is completely different, and the table has to answer to it.
In a cath lab, the C-arm is the centrepiece. The table must get out of the imaging path rather than block it. That is why the tabletop is carbon-fiber sandwich construction — it stays radiolucent under fluoroscopy while carrying a 250 kg patient without flex. A standard stainless steel surgical top would create artefacts and shadowing right where the cardiologist is trying to see the vessel.
Positioning corrections happen constantly, mid-procedure. During coronary angiography, the operator makes small, repeated adjustments while watching the live image. That is why this table combines motorized height adjustment with 80 cm of longitudinal and 25 cm of lateral manual sliding on both sides — the scrub staff can nudge the tabletop directly at the table, hands on, without waiting for a motor cycle.
Access has to come from every angle. The C-arm, the sterile field, the anaesthesia machine, and the monitoring stack all compete for the same floor space. A low-profile base and an unobstructed imaging window under the tabletop let a single table serve all of them.
Not every cath lab needs the same table. Use this guide to pick the right one.
| Your requirement | Recommended Neway table | Why |
|---|---|---|
| Dedicated cath lab, fluoroscopy-heavy | Catheterization Table | 35 mm carbon-fiber top, 180 cm imaging area, bilateral manual sliding for live image corrections |
| Cath lab with a fixed C-arm and standard surgical work | Hydraulic C-Arm Compatible Table | Radiolucent top with a hydraulic base — lower capital cost for mixed-use rooms |
| Cath lab that also runs general surgery | General Surgery OT Table | Multi-position 202/304 stainless steel top with C-arm compatibility |
| Interventional radiology, ortho and trauma imaging | Orthopedic Table | Trauma and fracture positioning with heavy-duty load rating |
| High-volume multi-specialty OT | Electric Operation Theatre Table (NW-101) | 4-function electro-mechanical, multi-movement positioning |
The tabletop is built from a 35 mm carbon-fiber sandwich construction. It delivers the structural rigidity a catheterization table needs without the mass of a solid radiolucent top, and it keeps a large, clear imaging field for fluoroscopy and C-arm guided work.
Height is motorized for fast patient transfers and setup. Longitudinal and lateral travel are manual and bilateral, so staff make fine corrections in real time without losing their view of the surgical field.
A rigid structural platform, a rigid carbon-fiber tabletop, and a stable base keep the table steady through the patient transfers and aggressive positioning that cardiac and EP work demands. Capacity is rated to 250 kg, with an emergency stop on powered movement.
Integrated accessory rails let you configure the table for your procedural mix — arm boards, lateral supports, and compatible catheterization accessories mount directly without aftermarket modification.
A cath lab OT table is a patient positioning table designed for a cardiac catheterization laboratory. Unlike a general surgical OT table, it uses a radiolucent carbon-fiber tabletop so a C-arm can image the patient through the table without obstruction, and it provides a large imaging area with sliding travel for precise positioning during live fluoroscopy.
No, though they overlap. A C-arm compatible OT table is any surgical table with a radiolucent section that allows imaging through it, and it may be built for orthopaedics, urology, or general surgery. A cath lab table is purpose-built for cardiology: the imaging area is larger, the tabletop is fully radiolucent carbon fiber rather than a radiolucent insert, and the sliding mechanism is tuned for the rapid, repeated corrections that catheterization and EP work demand.
Price depends on tabletop construction, slide travel, load capacity, and the movement functions required. Carbon-fiber cath lab tables sit above general surgical tables and below imported radiolucent systems. Contact Neway for a quotation against your cath lab layout and imaging equipment, and we will configure the table to match.
Standard adult cath lab tables are rated to 250 kg. If your department routinely handles bariatric patients or uses heavy traction and fixation accessories, specify the higher-capacity variant at order time.
Yes. The motorized height adjustment and bilateral sliding make it usable for general surgical work, but for a dedicated cath lab we recommend this carbon-fiber configuration rather than a general surgical table with a radiolucent insert, because it gives a far clearer image and faster positioning during fluoroscopy.
Yes. We deliver across India with on-site installation, functional testing, calibration, operator training for your staff, and documentation handover. Warranty and technical support cover installation, operation, maintenance, and troubleshooting.
Tell us your cath lab dimensions, imaging equipment in use, and procedure mix, and we will specify the configuration that fits. Factory-direct from Bhiwani, Haryana — no distributor margin in between.
Need help choosing? Call +91 9991115076 or email us — our engineering team handles cath lab and OT table specification for hospitals across India.
